Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Ssangyong Tivoli?

Model: SsangYong Tivoli MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

Video tutorial

In this tutorial, see how to replace the cabin filter in the Ssangyong Tivoli, a very simple and quick operation. First, position yourself in the passenger seat, then open the glove compartment and, using a simple cross-head screwdriver, remove the screws located at the sides of the compartment.

Next, also remove the indicated bolt, separate the glove compartment from the dashboard, and disconnect the courtesy light connector. At this point, open the long rectangular flap, extract the old filter, and insert the replacement.

To reassemble everything, simply follow the reverse procedure.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Tunnel of a Ssangyong Tivoli - KG Mobility Tivoli
How to Remove the Centre Tunnel of a Ssangyong Tivoli - KG Mobility Tivoli
SsangYong Tivoli (2015-2023 / MK 1) In this guide, we will remove the centre tunnel of the Ssangyong Tivoli, as well as the KG Mobility Tivoli, in simple steps. First, get inside the ca…
How to Remove the Rear Light on a Ssangyong Tivoli - KG Mobility Tivoli
How to Remove the Rear Light on a Ssangyong Tivoli - KG Mobility Tivoli
SsangYong Tivoli (2015-2023 / MK 1) Today's guide will show you how to remove and replace the rear light or its bulbs on a Ssangyong Tivoli, as well as on a KG Mobility Tivoli. First, m…
Fuse Layout and Positioning for the Ssangyong Tivoli
Fuse Layout and Positioning for the Ssangyong Tivoli
SsangYong Tivoli (2015-2023 / MK 1) The following information will illustrate the positioning and layout of the fuses for the Ssangyong Tivoli, following the instructions below. First, …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos