Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Crosstrek
    4. : 2012-2017 (MK 1, GP)

Subaru Crosstrek Years 2012-2017 (MK 1, GP)

Subaru Crosstrek (2012-2017 / MK 1, GP)
How do you replace the front brake pads on a Subaru Crosstrek?
To replace the front brake pads of the Subaru Crosstrek, the car must be lifted so that the bolts securing the corresponding front wheel can be unscrewed. …read all…
Posted on 25 June 2023 by ScegliAuto
Subaru Crosstrek (2012-2017 / MK 1, GP)
How to replace the battery on a Subaru Crosstrek.
If we have noticed that the battery of our car is unable to provide enough charge to start the engine, it is necessary to proceed with its replacement. In the …read all…
Posted on 13 May 2023 by ScegliAuto
Subaru Crosstrek (2012-2017 / MK 1, GP)
How to replace the cabin air filter on a Subaru Crosstek.
If we intend to replace the cabin air filter on this car model by ourselves, in the following description we can read all the indications and instructions on …read all…
Posted on 20 April 2023 by ScegliAuto
Subaru Crosstrek (2012-2017 / MK 1, GP)
How do you replace the air filter on your Subaru Crosstrek?
In order to replace the air filter on the Subaru Crosstrek, you need to open the hood, so that you can access the cover in the upper plastic part at the right …read all…
Posted on 10 June 2023 by ScegliAuto
Subaru Crosstrek (2012-2017 / MK 1, GP)
How to locate fuses and know their schematics in a Subaru Crosstrek
We can locate the first fuse panel of a Subaru Crosstrek car inside the passenger compartment of the vehicle, exactly located at the bottom left of the …read all…
Posted on 21 September 2022 by ScegliAuto
Battery (3) Key (2) Checks and maintenance (1) Air filter (1) Cabin air filter (1) Engine oil (1) Door panel (1) Brake pads (2)

See also:

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos