Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

In the Subaru Crosstrek, how do you reset the tire warning light?

Model: Subaru Crosstrek GP, MK 1 - Years 2012-2017
Part:

Fortunately for us, the tire warning light on the Subaru Crosstrek does not require complex procedures to turn it off after being activated by the control unit due to an anomaly. This video shows how to normally proceed, which is to investigate the reason for the warning light being on. If it is simply due to flat tires, we can take care of it ourselves by inflating them, even with a small portable compressor. After doing this, when we access the cabin, we will notice that the alarm previously displayed on the dashboard will no longer be active, as it has been automatically reset.

Posted on 28 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning on the Subaru Crosstrek
How to reset the tire pressure warning on the Subaru Crosstrek
Subaru Crosstrek (2018-2023 / MK 2) In a few simple steps, we will see how to reset the tire pressure warning on the Subaru Crosstrek; before resetting the TPMS sensors, it is necessary…
How to Reset the Tire Pressure Light on the Subaru Crosstrek?
How to Reset the Tire Pressure Light on the Subaru Crosstrek?
Subaru Crosstrek (2024-2026 / MK 3, GU) You can reset the tire pressure light displayed on the instrument panel of the Subaru Crosstrek by inflating the tires to the optimal pressure value:…
How to Disable Traction Control on Subaru Crosstrek?
How to Disable Traction Control on Subaru Crosstrek?
Subaru Crosstrek (2012-2017 / GP, MK 1) You can disable the traction control on the Subaru Crosstrek by first inserting the ignition key into the corresponding ignition switch: once the das…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos