Do it yourself
| ||||
|
Subaru Crosstrek - Video tutorial
Model: Subaru Crosstrek
MK 1, GP
- Years 2012-2017 To replace the front brake pads of the Subaru Crosstrek, the car must be lifted so that the bolts securing the corresponding front wheel can be unscrewed. After the wheel is completely removed, the bolts securing the brake caliper can be unscrewed, allowing it to be detached from the disc. This will allow the pads inside to be removed and replaced with new replacement parts. After the replacement, the caliper can be positioned again, fastened with bolts, and the corresponding wheel installed.
Posted on 25 June 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |