Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Subaru Crosstrek?

Model: Subaru Crosstrek MK 2 - Years 2018-2023
Part: Brake pads

To replace the brake pads on a Subaru Crosstrek, follow the same procedure for both the front and rear wheels: you will need to lift the car with a jack so that the wheels do not touch the ground. By loosening the mounting bolts, you can completely remove the wheels and access the brake caliper at the back: then, unscrew the bolts that secure the caliper to the rotor, detach it completely, and slide out the pads inside. This way, you can install the new pads, reattach the caliper, and put the corresponding wheel back on.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Subaru Crosstrek
How to Replace the Front Brake Pads on a Subaru Crosstrek
Subaru Crosstrek (2012-2017 / GP, MK 1) To replace the front brake pads on a Subaru Crosstrek, lift the vehicle so you can remove the bolts securing the corresponding front wheel. Once the …
How do you set the clock on the Subaru Crosstrek?
How do you set the clock on the Subaru Crosstrek?
Subaru Crosstrek (2012-2017 / GP, MK 1) In order to set the clock of the Subaru Crosstrek, you will need to insert the ignition key into the corresponding slot: once the dashboard is turned…
How to Replace the Battery on a Subaru Crosstrek
How to Replace the Battery on a Subaru Crosstrek
Subaru Crosstrek (2018-2023 / MK 2) To replace the battery on a Subaru Crosstrek, open the hood to access the battery located in the engine compartment near the left headlight. Loosen t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos