Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Subaru Impreza?

Model: Subaru Impreza MK 3 - Years 2007-2011
Part: Brake pads

To replace the front brake pads on a Subaru Impreza, lift the car to loosen the bolts of the corresponding front wheel. Once the wheel is removed, you will have access to the components at the back, where you need to unscrew the bolts of the brake caliper. This will detach it from the disc, allowing you to remove the pads inside and replace them with new ones. After inserting the new pads, reposition the caliper onto the disc and secure it with the appropriate bolts.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the bonnet on a Subaru Impreza?
How to open the bonnet on a Subaru Impreza?
Subaru Impreza (2007-2011 / MK 3) In this tutorial, we will see how to open the bonnet on a Subaru Impreza, a very simple operation identical to the standard procedure. First, open th…
Where is the fuse box of the Subaru Impreza located?
Where is the fuse box of the Subaru Impreza located?
Subaru Impreza (2016-2023 / MK 5) In this new guide, we will help you easily locate the fuse box inside the cabin of your Subaru Impreza. First of all, enter the car and reach the dri…
How to Replace the Rear Light Bulb on a Subaru Impreza
How to Replace the Rear Light Bulb on a Subaru Impreza
Subaru Impreza (2007-2011 / MK 3) Before you start, open the rear hatch of your Subaru Impreza. Begin by prising up and moving the carpet near the rear light. Next, rotate the base of…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos