Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to use the "set" function of the Subaru TPMS

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Onboard computer

In this video we will see how to use the "set" function of the TPMS on Subaru vehicles: like all vehicles, even Subaru has the label with the recommended pressures from the manufacturer on the driver's door thickness, expressed in kPa and Bar, depending on the load of the vehicle. The adjustment is made with the "set" button located in the glove compartment. For example, if we start with the caravan, and we have adjusted the pressure accordingly, we must press the "set" button for two seconds, the message "TPMS 1" then "TPMS 2" and then "TPMS 3" finally "TPMS 3 SET" will appear, at this point we will have given the correct information to our system.

Posted on 13 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) On the Subaru Forester, the TPMS light only turns off when the pressures are correct and the system 'sees' consistent values. First, inflate the tyre…
How to check tire pressures and reset the TPMS of the Subaru Forester
How to check tire pressures and reset the TPMS of the Subaru Forester
Subaru Forester (2018-2025 / MK 5, SK) Today we will see the instructions that will allow us to check the tire pressures, thus resetting the TPMS warning on the Subaru Forester; it is nece…
How to Reset the Tyre Pressure Light on Subaru Forester
How to Reset the Tyre Pressure Light on Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) This brief video tutorial shows how to reset the TPMS (Tyre Pressure Monitoring System) light on a fourth-generation Subaru Forester, model years 201…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos