Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ABS wheel sensor on a Subaru Impreza

Model: Subaru Impreza MK 3 - Years 2007-2011
Part: Checks and maintenance

In this video, we see how to replace the ABS wheel sensor of a Subaru Impreza: first, we remove the wheel and lift the car off the ground. The connection is bolted to the hub and then we have another connection point in the wheel arch, fixed with 10mm bolts. We will remove it very gently from its housing. Now we need to remove the engine compartment connection, to reach which we must move some rubber tubes, in order to reach, in the lower part of the engine, remove the sensor connector that is in a difficult-to-reach point. This is also a very delicate component. Instead, from the wheel arch, there is only the passage of the cable, so we can extract it from there. We can find the price, for example, on auto-doc with the code 0 265 009 230 at a price of 13.25 euros + 9.90 euros for shipping.

Posted on 29 May 2025 by ScegliAuto

Video tutorial

Related tutorials

…
How to Replace the Front Brake Pads on a Subaru Impreza?
How to Replace the Front Brake Pads on a Subaru Impreza?
Subaru Impreza (2007-2011 / MK 3) To replace the front brake pads on a Subaru Impreza, lift the car to loosen the bolts of the corresponding front wheel. Once the wheel is removed, yo…
How to Replace the Rear Light Bulb on a Subaru Impreza
How to Replace the Rear Light Bulb on a Subaru Impreza
Subaru Impreza (2007-2011 / MK 3) Before you start, open the rear hatch of your Subaru Impreza. Begin by prising up and moving the carpet near the rear light. Next, rotate the base of…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos