Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the automatic gear shift knob in the Subaru Legacy?

Model: Subaru Legacy BM, MK 5, BR - Years 2009-2014
Part: Shift knob

In this tutorial, we can see how to replace the automatic gear knob in the Subaru Legacy, a very simple and quick operation. First, let's go inside the cabin, then separate the chrome ring from the knob by pushing it down and prying with a very thin tool, such as a utility knife. Next, let's locate the indicated clip, detach it using pliers, and remove the knob from the shaft by pulling it forcefully upwards. At this point, all that remains is to position the replacement part, reinsert the clip, and secure the lower ring.

Posted on 27 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorber on a Subaru Legacy
How to Replace the Rear Shock Absorber on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, MK 5, BR) Before you start, lift the rear end of your Subaru Legacy. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, using a ja…
Where to Find the OBD Port of the Subaru Legacy 2011
Where to Find the OBD Port of the Subaru Legacy 2011
Subaru Legacy (2009-2014 / BM, MK 5, BR) If you do not know where the OBD port of your 2011 Subaru Legacy is located, do not worry because this guide will help you find it without any diffic…
How to Replace the Front Headlamp Bulb on the Subaru Legacy
How to Replace the Front Headlamp Bulb on the Subaru Legacy
Subaru Legacy (2014-2019 / BN, MK 6, BS) Replacing the front headlamp bulb on your Subaru Legacy (2014-2019) is a straightforward task that takes just a few minutes to complete without any d…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos