Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Subaru XV

Model: Subaru Xv MK 1 - Years 2012-2017
Part: Cabin air filter

Before you can start, open the front passenger door of your Subaru XV. Begin by opening the glove compartment. Next, unclip and move away the side cylinders. At this point, unclip and remove the glove compartment, and you will reach the cabin air filter. Proceed to unclip it and remove it from its housing, successfully completing the disassembly. To install the new cabin air filter, simply reverse these instructions, and the replacement will be finished.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Air Filter on a Subaru XV
Replacing Air Filter on a Subaru XV
Subaru Xv (2012-2017 / MK 1) Replace the damaged and worn filter on a Subaru XV with a new filter. Open the car door, pull up the lever to open the engine compartment located at …
Replacing the Cabin Filter on Subaru XV
Replacing the Cabin Filter on Subaru XV
Subaru Xv (2012-2017 / MK 1) Replace the cabin filter at every service. Remove the cabin filter on a Subaru XV by taking it out from inside the glove compartment. Open the glove …
Replacing the Air Filter on a Subaru XV
Replacing the Air Filter on a Subaru XV
Subaru Xv (2012-2017 / MK 1) As part of the regular maintenance for the Subaru XV, you need to replace the air filter element, which is important for keeping your engine efficien…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos