Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light Bulbs on the Subaru Ascent

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Tail light bulb

Let's discover in this brief guide how to replace the tail light bulbs on the Subaru Ascent in simple and quick steps. First, open the rear hatch of the trunk and start removing the plastic cover found on the sides of the light; then unscrew the fastening screws located on the sides, disconnecting the electrical connectors of the bulbs to remove it, as shown in the video. At this point, replace all the bulbs in the light if necessary; then reassemble everything, following the video tutorial to the end!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Subaru Ascent?
How to Replace the Cabin Air Filter on a Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) To replace the cabin air filter on a Subaru Ascent, open the glove compartment located on the passenger side to release the internal fastening clips.…
Where is the spare tire located on the Subaru Ascent?
Where is the spare tire located on the Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) The spare tire on the Subaru Ascent is located under the vehicle's floor, in the trunk area. To access it, open the rear trunk and lift the carpet at…
How to Replace the Key Fob Battery for the Subaru Ascent
How to Replace the Key Fob Battery for the Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) If you need to replace the button cell battery inside your Subaru Ascent key fob, just follow the steps outlined in this mini guide. The entire proce…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos