Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : How to replace the cabin filter in the Subaru Forester?

Subaru Forester - Video tutorial

Model: Subaru Forester SJ, MK 4 - Years 2012-2019
Part: Cabin air filter
Operation: How to replace the cabin filter in the Subaru Forester?

Replacing the cabin air filter in the Subaru Forester is a very simple and quick operation, let's see how to proceed in this video. After getting the right replacement filter, we open the glove compartment drawer on the passenger side and disconnect the shock absorber, disengaging the end. We then press the left corner inwards, so as to release the pin, and place the drawer on the ground. At this point, we unlock the rectangular door and extract the old filter, insert the spare and reassemble everything following the reverse procedure.


Posted on 6 August 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Forester 2008-2011 - How much does the pollen filter cost for the 2009 Subaru Forester? Read Answer
    • Forester 2012-2019 - Where is the cabin filter in the Subaru Forester? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos