Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : How to replace the air filter in the Subaru Forester?

Subaru Forester - Video tutorial

Model: Subaru Forester SG, MK 2 - Years 2002-2008
Part: Cabin air filter
Operation: How to replace the air filter in the Subaru Forester?

In this tutorial we can see how to replace the cabin air filter in the Subaru Forester, a very simple and fast operation. Since the filter on this model is located behind the glove box on the passenger side, first of all we will have to remove the drawer. To do this, we unscrew the 5 internal screws and the 4 lower screws. At this point, we open the long rectangular door by unlocking the two clips, extract the old filter and clean the housing thoroughly. Finally, we assemble the spare part following the reverse procedure and taking care to insert it in the right direction.


Posted on 16 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Forester 2008-2011 - How much does the pollen filter cost for the 2009 Subaru Forester? Read Answer
    • Forester 2012-2019 - Where is the cabin filter in the Subaru Forester? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos