Do it yourself
| ||||
|
Subaru Crosstrek - Video tutorial
Model: Subaru Crosstrek
MK 2
- Years 2018-2024 The guide shows how to perform an oil change on the Subaru Crosstrek Mk2. The first step is to secure the vehicle and open the engine oil tank cap. From underneath the vehicle, unscrew the 14mm bolt and let the old lubricant flow into a suitable container. Once all the oil has drained, reinstall the bolt with a new gasket and clean any residue. In the engine compartment, to the left of the oil tank fill cap, is the engine oil filter. Remove the old cartridge and clean any fluid residue. Install the new cartridge, lubricating the gasket. Fill the tank and start the engine for a few minutes. Check the oil level and top up if necessary.
Posted on 7 June 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |