Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Subaru Crosstrek

Model: Subaru Crosstrek MK 2 - Years 2018-2023
Part: Service warning light

The replacement of the motor oil and oil filter is reminded through the regular maintenance reminder that appears on the instrument panel; let's see below the procedure to reset this warning light on the Subaru Crosstrek. First of all, we get into the car and start up the instrument panel; then we go to the settings of the onboard computer, using the controls located at the bottom left of the steering wheel, to enter the motor oil section, as shown in the video. At this point, we follow the guided procedure to confirm and perform the service reset!

Posted on 27 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on the Subaru Crosstrek?
How to Reset the Tire Pressure Light on the Subaru Crosstrek?
Subaru Crosstrek (2024-2026 / MK 3, GU) You can reset the tire pressure light displayed on the instrument panel of the Subaru Crosstrek by inflating the tires to the optimal pressure value:…
How to Reset the Service Light on a Subaru Crosstrek?
How to Reset the Service Light on a Subaru Crosstrek?
Subaru Crosstrek (2024-2026 / MK 3, GU) In this tutorial, you will see how to reset the service light on a Subaru Crosstrek, a very simple and quick operation to perform only after completi…
How to reset the tire pressure warning on the Subaru Crosstrek
How to reset the tire pressure warning on the Subaru Crosstrek
Subaru Crosstrek (2018-2023 / MK 2) In a few simple steps, we will see how to reset the tire pressure warning on the Subaru Crosstrek; before resetting the TPMS sensors, it is necessary…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos