Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Your Car Remote Battery

Model: Subaru Legacy BL, MK 4, BP - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Key

See other generations:
Video tutorial

The following guide shows how to replace the battery in your car remote. Identify the part of the remote that needs to be removed, and using tweezers or a very thin flathead screwdriver, try to lower the tab. When you hear a slight click, apply a little pressure to remove the battery cover.

Be very careful not to damage the internal parts of the remote to avoid repercussions on its proper functioning. To close the remote, simply follow the reverse procedure after reinstalling the battery.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Subaru Legacy key remote control
How to replace the battery of the Subaru Legacy key remote control
Subaru Legacy (1999-2004 / MK 3, BH, BE) This brief and simple guide will show us the process of disassembling and replacing the battery of the Subaru Legacy key remote. First, we take our r…
How to Replace the Key Battery on a Subaru Legacy
How to Replace the Key Battery on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, BR, MK 5) If you need to replace the remote key battery on this vehicle, you will find simple instructions in the description below and in the video tutorial. …
How to change the battery in the Subaru Legacy key fob
How to change the battery in the Subaru Legacy key fob
Subaru Legacy (2014-2019 / BN, BS, MK 6) In a few simple steps, see how to disassemble and replace the battery in the Subaru Legacy key fob. First, take your key fob and remove the physical …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos