Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Car Engine Air Filter

Model: Subaru Impreza MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

The air filter is a component of the fuel system in your car and serves to filter and clean the air that is drawn in from the outside and delivered to the combustion chamber. As mentioned, the air is channelled, filtered, and directed towards the combustion chamber; without a filter, we risk allowing foreign particles normally contained in the air to enter.

An air filter can last between 20,000 and 30,000 miles. However, it is advisable to check the user and maintenance manual for the correct mileage recommended by the manufacturer for replacement.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Removing the Engine Air Filter on a Subaru Impreza
Removing the Engine Air Filter on a Subaru Impreza
Subaru Impreza (2011-2016 / MK 4) How do you remove the engine air filter on a Subaru Impreza? Let's see how to do it after opening the engine bay. Once the front bonnet is lifted, lo…
How to replace the air filter in a Subaru Impreza.
How to replace the air filter in a Subaru Impreza.
Subaru Impreza (2001-2007 / MK 2) In this video tutorial, you can see how to replace the air filter in a 2002 Subaru Impreza with a 2.5-litre naturally aspirated petrol engine, follow…
How to Replace the Air Filter on a Subaru Impreza
How to Replace the Air Filter on a Subaru Impreza
Subaru Impreza (2011-2016 / MK 4) The air filter located in the engine bay of your Subaru Impreza Mk4 is one of the most important components, as it allows the engine to "breathe" pro…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos