Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver's Door Panel on a Suzuki SX4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Door trim panel

How do you remove the driver's door panel on a Suzuki SX4? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a screwdriver to remove the securing screws in the handle located inside the door panel, and unscrew the screws in the plastic of the door opening lever. Use a lever to detach the retaining clips around the perimeter of the car door panel. Finally, grasp the panel with your hands and lever it off the door. Reassemble everything in reverse order.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Suzuki Sx4
How to Remove the Door Panel on a Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) How to remove the door panel on a Suzuki Sx4? Here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the…
Removing Door Panel on Suzuki Sx4
Removing Door Panel on Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Removing the door panel of a Suzuki Sx4? Let's see how to remove the rear panel. Use a plastic trim tool to remove the screw cover in the door handle…
How to Remove the Door Panel of a Suzuki Sx4
How to Remove the Door Panel of a Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) How to remove the door panel of a Suzuki Sx4? Don't worry, follow these steps. Before starting the disassembly, disconnect the battery terminals loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos