Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Traction Control Functions on the Suzuki Jimny

Model: Suzuki Jimny Jb74w, Jb64w - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

See other generations:
Video tutorial

In this video, you can see the traction control functions of the Suzuki Jimny: When the road conditions become challenging, shift the lever to "4H" to engage 4WD; for steeper inclines, switch to "4L" to engage low range. When returning to tarmacked roads, shift the lever back to "2H" for two-wheel drive.

The vehicle is equipped with the "All Grip Pro" system with a transfer case, synchroniser, and pneumatic locking hubs, which may not engage immediately: it can take several seconds after shifting the transfer lever. All technical data for the three driving modes available with this vehicle are indicated.

If the 4WD indicator light continues to flash after engagement, the system may not be functioning correctly; with the "4L" system, the ESP is disabled to provide greater traction.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on the Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) To replace the timing belt on the Suzuki Jimny, open the bonnet to access the front of the engine bay, where the pulleys are located. These can be lo…
How to Replace the Lambda Sensor in the Suzuki Jimny?
How to Replace the Lambda Sensor in the Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) To replace the lambda sensor in the Suzuki Jimny, open the bonnet to access the engine bay: here you will locate the lambda sensor on the right side …
How to Adjust the Handbrake on the Suzuki Jimny?
How to Adjust the Handbrake on the Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) To adjust the handbrake on the Suzuki Jimny, tighten the nut located at the base of the handbrake lever. Tightening it will make the lever firmer and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos