Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Suzuki Samurai located?

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Fuse box

The Suzuki Samurai, produced from 1989 to 2003, contains a fuse box inside. The fuse box in question is located inside the front hood, between the engine and the battery. Inside the box, we find all the fuses related to the electronic parts of the vehicle. The fuses are meant to intervene in case of an electronic problem to prevent the component from getting damaged; in fact, when a component has an issue, it is the fuse that burns out and not the component itself. To access the fuse box, we need to open the front hood and release the cover of the box.

Posted on 11 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to install the Malpassi filter on the Suzuki Samurai SJ.
How to install the Malpassi filter on the Suzuki Samurai SJ.
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Today we will see how to replace the fuel filter of the Malpassi on the Suzuki Samurai SJ. To perform the replacement, we turn off the engine and let…
Replacing the Key Battery on a Suzuki Samurai
Replacing the Key Battery on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Removing the key barrel from a Suzuki Samurai and replacing its battery is very simple, and we will demonstrate it now. You will need a small cross-h…
Replacing the Thermostat on Suzuki Samurai
Replacing the Thermostat on Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Lift the bonnet and place the support rod. Locate the cover containing the thermostat of your Suzuki Samurai by watching the video: note how it is in…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos