Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the tire pressure of the Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Checks and maintenance

Before driving our Suzuki Swift, it is important to know and adjust the tire pressure according to the manufacturer's specifications. The pressure of the front tires should be 32 PSI, while the pressure of the rear tires, calculated with the weight of four people plus extra luggage, should be 41 PSI. It is important to ensure that the air fill valve cap is tightened properly after adjusting the tire pressure, as otherwise there could be an air leak that would compromise safe driving and the condition of the tires.

Posted on 12 January 2026 by ScegliAuto

Video tutorial

Related tutorials

What does the TPMS light on the Suzuki Swift indicate?
What does the TPMS light on the Suzuki Swift indicate?
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) When the TPMS light on a Suzuki vehicle comes on, it means that it is necessary to check the tire pressure. The tire pressure varies depending on the…
Resetting the Tyre Pressure of a Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) The video shows how to reset the tyre pressure of a Suzuki Swift. It is a straightforward but important operation that takes only a few minutes. Afte…
How do you check the tire pressure values on the Suzuki Swift?
How do you check the tire pressure values on the Suzuki Swift?
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In order to check the tire pressure values on the Suzuki Swift, you need to turn on the instrument panel by inserting the key into the ignition switc…

Other guides you may be interested in

    Frequently Asked Questions

    • Swift 2017-2024 - How many liters of fuel does the Suzuki Swift have in reserve? Read answer
    • Swift 2010-2017 - How many liters of reserve does the Suzuki Swift have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos