Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Left Rear Door Panel on Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years 2005-2015
Part: Door trim panel

To remove the left rear door panel on your Suzuki Grand Vitara, disconnect the battery terminals located in the engine bay. Use a screwdriver to unscrew the screws in the area of the upper door release lever and the screws in the handle (after removing the plastic screw covers). Remove the plastic trim around the release lever; unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and disconnect the wiring harness and the opening cable. Carry out the desired maintenance inside the door.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Suzuki Gran Vitara
How to Replace the Battery on a Suzuki Gran Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) How to replace the battery on a Suzuki Gran Vitara? This guide explains how to perform the battery replacement: open the car door and pull the lever …
How to Remove the Starter Motor on a Suzuki Grand Vitara
How to Remove the Starter Motor on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) How do you remove the starter motor on a Suzuki Grand Vitara? Lift the vehicle with a column lift and secure it. First, disconnect the battery cables…
How to Remove the Rear Door Panel of a Suzuki Grand Vitara?
How to Remove the Rear Door Panel of a Suzuki Grand Vitara?
Suzuki Grand Vitara (2015-2024 / MK 3) To remove the rear door panel of the Suzuki Grand Vitara, use a tool to pry off the trim around the internal door handle. Once this trim is removed, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos