Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Battery

See other generations:
Video tutorial

How to remove the engine battery from a Suzuki Grand Vitara? Let's look at the removal process. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet, disengaging the locking lever with your fingers.

Once the engine compartment is open, you will find the battery at the top left; remove the nuts securing the battery terminals, then take the battery out of the engine compartment and replace it with a new one (same voltage). Close the bonnet after installation.

Check the vehicle's proper functioning.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Suzuki Grand Vitara
How to Replace the Key Battery in a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the lower section of the key of your Suzuki Grand Vitara, and then lever it ope…
How to Replace the Remote Battery of the Suzuki Grand Vitara?
How to Replace the Remote Battery of the Suzuki Grand Vitara?
Suzuki Grand Vitara (1999-2005 / MK 1) Replacing the remote battery of the Suzuki Grand Vitara, as shown in this tutorial, is an extremely simple and quick task. You will need a replacemen…
How to Replace the Starter Motor in a Suzuki Grand Vitara?
How to Replace the Starter Motor in a Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the starter motor in a Suzuki Grand Vitara, open the bonnet to gain access to the components inside the engine bay: on the left side, you …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos