Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine Spark Plugs from a Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Spark plugs

See other generations:
Video tutorial

How do you remove the engine spark plugs from a Suzuki Grand Vitara? Here’s how to replace them: open the engine bay and lift the front bonnet, securing it in place, then disconnect the battery terminals. Remove the soundproofing panel from the engine, then use a screwdriver or pliers to take out the coils located inside the engine head; next, unscrew the spark plugs with a socket wrench and pull them out of the head.

Take the new spark plugs and guide them into the engine head using the socket extension, tighten them, and connect the power coils to each spark plug with the new leads. Finally, close the engine bonnet and test the correct operation of the spark plugs.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Replacing Glow Plugs on Suzuki Grand Vitara
Replacing Glow Plugs on Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Today, I will briefly show you how to replace the glow plugs on a Suzuki Grand Vitara F9QB, the model produced from 2005 to 2015. Lift the bonnet and…
How to Dismantle the Starter Motor on a Suzuki Grand Vitara Mk1
How to Dismantle the Starter Motor on a Suzuki Grand Vitara Mk1
Suzuki Grand Vitara (1999-2005 / MK 1) This guide shows how to dismantle the starter motor on a Suzuki Grand Vitara Mk1; this procedure is also applicable to the Suzuki XL-7. The first ste…
How to replace the timing belt on the Suzuki Grand Vitara?
How to replace the timing belt on the Suzuki Grand Vitara?
Suzuki Grand Vitara (1999-2005 / MK 1) To replace the timing belt on the Suzuki Grand Vitara, open the bonnet to access the components located inside the engine compartment: at the front o…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos