Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Brake Pads

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

Remove the wheel and gently detach the caliper by removing the two clips with two large screwdrivers or the appropriate tools. Realign the piston by pushing it back in. Unscrew the two pins of the caliper and remove the worn pads, replacing them with two new ones of the same type, ensuring the correct orientation; the pad with the electrical contacts must be mounted facing inwards, paying attention to the direction of travel.

Clean the pads and the entire mechanical assembly thoroughly using compressed air and deoxidising spray. Refit the bracket, cleaning and lubricating the retaining springs before tightening them.

Refit the caliper, ensuring all clips are correctly positioned. Perform the same operation on the other brake.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Brake Pads on a Suzuki SX4
Replacing Rear Brake Pads on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this video tutorial, you will learn how to remove the rear brake pads from a Suzuki SX4. First, lift the vehicle with a jack and remove the rear w…
Replacing the Brake Pads
Replacing the Brake Pads
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Loosen the wheel nuts and lift the vehicle, securing it safely. Unscrew the bolts and remove the wheel. Unscrew the two retaining screws of the calip…
Replacing Brake Pads
Replacing Brake Pads
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this video, you will replace the front brake pads on a Suzuki 4x4. After securing the vehicle and positioning it on a jack, use a 14 mm socket to …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos