Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter on a Suzuki Samurai

Model: Suzuki Samurai Sj30, JA, JB, Sj40 - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Air filter

Video tutorial

Replace the air filter if you have driven many miles; here's how to do it on a Samurai. Lift the front bonnet and secure it with the prop rod. Remove the engine soundproofing panel, then unclip the metal fasteners and open the air kit. Remove the cover from the filter box, disconnect the air intake hose, and take out the worn air filter.

Insert a new filter into the designated housing (ensuring it fits snugly around the edges). Finally, refit the cover of the air box and tighten the metal clips.

Reconnect the large air intake hose. Close the front bonnet after maintenance.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to install the Malpassi filter on the Suzuki Samurai SJ.
How to install the Malpassi filter on the Suzuki Samurai SJ.
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) Today we will see how to replace the fuel filter of the Malpassi on the Suzuki Samurai SJ. To perform the replacement, we turn off the engine and let…
How to Replace the Engine Oil and Oil Filter on the Suzuki Samurai
How to Replace the Engine Oil and Oil Filter on the Suzuki Samurai
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) Today, we will go through the procedure necessary to replace the engine oil and oil filter on the Suzuki Samurai, following these simple steps. First…
Replacing the Key Battery on a Suzuki Samurai
Replacing the Key Battery on a Suzuki Samurai
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) Removing the key barrel from a Suzuki Samurai and replacing its battery is very simple, and we will demonstrate it now. You will need a small cross-h…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos