Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Replacement for Suzuki Jimny

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Oil filter

See other generations:
Video tutorial

In this video tutorial, you will learn how to replace the oil filter on a Suzuki Jimny. First, open the bonnet from inside the car and remove the engine oil to access the filter.

Next, locate the oil filter under the engine compartment: unscrew it by hand, but if it doesn't budge, use the appropriate oil filter spanner. Replace it with the original spare part, paying special attention to the gasket that may need to be fitted.

Then, screw it in by hand and add the new engine oil!


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Suzuki Jimny?
How to Change the Engine Oil on a Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Today, discover the main steps to perform routine maintenance by changing the engine oil and oil filter on the first series Suzuki Jimny in simple an…
Replacing Air Filter on a Suzuki Jimny
Replacing Air Filter on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Replace the air filter at each service interval. Open the car door, pull up the lever to open the engine compartment, and lift the front bonnet, secu…
Resetting the Service Light on the Suzuki Jimny
Resetting the Service Light on the Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) The procedure to reset the service light for the engine oil change on the Suzuki Jimny is very straightforward. The video initially demonstrates the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos