Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Suzuki Jimny?

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Engine oil

Today, discover the main steps to perform routine maintenance by changing the engine oil and oil filter on the first series Suzuki Jimny in simple and quick steps. First, lift the vehicle and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Next, unscrew the oil filter, which is located near the sump, using the appropriate tool; simply replace it with the new one, screwing it in by hand before pouring in the new oil!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Suzuki Jimny
Resetting the Service Light on the Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) The procedure to reset the service light for the engine oil change on the Suzuki Jimny is very straightforward. The video initially demonstrates the …
How to Fit Roof Bars on a Suzuki Jimny
How to Fit Roof Bars on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Before you can begin, you need to exit the cabin of your Suzuki Jimny. Start by removing the plastic inserts located at the upper corners of the roof…
Where is the fuse box of the Suzuki Jimny engine located?
Where is the fuse box of the Suzuki Jimny engine located?
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) In order to access the fuse box located inside the engine compartment of your first series Suzuki Jimny, you must follow all the steps described in o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos