Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Gearbox Gasket Repair on Suzuki Swift 1.3

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Transmission

See other generations:
Video tutorial

Disconnect the battery by first unscrewing the positive terminal and then the negative with a 13 mm spanner. Remove the side bracket that secures the battery to the battery tray.

Take out the battery and the four screws holding the battery tray. At this point, you will see the two gearbox cables connected to the lever on the other side.

Remove the old damaged gasket and insert the new one into the bush, then insert the bush onto the pin. Refit the control unit onto the battery tray, then put everything back as it was before starting the job, mounting the battery tray and battery. Check the correct operation of the gearbox.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…
How to replace the gear knob of the Suzuki Swift 2023
How to replace the gear knob of the Suzuki Swift 2023
Suzuki Swift (2017-2024 / MK 6, A2L) In this new guide aimed at all of you who own a Suzuki Swift (year 2023), we will explain how you can replace the gear knob in a few minutes. First o…
How to Replace the Gear Knob on a Suzuki Swift
How to Replace the Gear Knob on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Before starting, sit in the driver's seat of your Suzuki Swift. Begin by unclipping and lowering the gear gaiter connected to the knob. Next, unclip …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos