Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp on Suzuki Samurai

Model: Suzuki Samurai Sj30, JA, JB, Sj40 - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Headlight

Video tutorial

Today, replace the headlamp on your Suzuki Samurai. Lift the bonnet and insert the support rod. Remove the screws securing the front grille, as shown in the video.

At this point, unscrew all the screws fixing the affected front headlamp. Remove the ring supporting the headlamp, disconnect the connector at the back, and take it out. Insert the new headlamp into its position and connect it, then reverse the steps until fully reassembled.

The video also explains how to switch from the original headlamp to an LED one, if you're interested.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp of a Suzuki Samurai
How to Replace the Front Headlamp of a Suzuki Samurai
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) How to replace the front headlamp of a Suzuki Samurai? Watch the video to learn how to proceed. Open the bonnet by pulling the lever located at the b…
Replacing Front Headlights on a Suzuki Samurai
Replacing Front Headlights on a Suzuki Samurai
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) In today's video, we will see how to remove and replace the original headlights on a Suzuki Samurai, following these simple steps. First, open the bo…
Guide to Replacing the Timing Belt of the Suzuki Samurai
Guide to Replacing the Timing Belt of the Suzuki Samurai
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) The following steps will show you how to dismantle and replace the timing belt of the Suzuki Samurai, following the instructions below. First, open t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos