Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of fuel pump or float of Suzuki Wagon R - Opel Agila

Model: Suzuki Wagon R MK 3 - Years 2003-2008
Part: Fuel pump

In this video tutorial we will see the instructions that will allow us to disassemble and replace the fuel pump or the floating pump of the Suzuki Wagon R, but also of the Opel Agila. First of all we lift the car and start by removing the fuel tank; to do this we unscrew all the fixing screws and disconnect the various fuel pipes, as shown in the video. At this point we disconnect the electric connector of the float and the petrol pipe; unscrew the ring nut of the pump to remove it and replace it with the new one, applying the reverse procedure.

Posted on 21 February 2022 by ScegliAuto

Video tutorial

Related tutorials

Cabin filter replacement on Suzuki Wagon R - Opel Agila
Cabin filter replacement on Suzuki Wagon R - Opel Agila
Suzuki Wagon R (2003-2008 / MK 3) .. air filter on a Suzuki Wagon R, but also on the Opel Agila. First we go to identify the filter, which we find on the passenger compartment; then we.. …
Where are the fuses located in the Suzuki Wagon R?
Where are the fuses located in the Suzuki Wagon R?
Suzuki Wagon R (2003-2008 / MK 3) The fuses of the Suzuki Wagon R are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it is possible…
Where are the fuses located in the Suzuki Wagon R?
Where are the fuses located in the Suzuki Wagon R?
Suzuki Wagon R (2008-2012 / MK 4, Mh23s) The fuses of the Suzuki Wagon R are all contained within the corresponding fuse boxes that are installed on the vehicle: in this type of vehicle, it …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos