Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling the CV Joint

Model: Suzuki Liana MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Axle shaft

Video tutorial

Start by loosening the central fastening nut of the driveshaft at the hub before lifting the vehicle. Also, loosen the wheel fastening bolts and then proceed to lift the vehicle, completing the removal of the wheel.

Remove the fastening bolt of the wishbone ball joint at the hub and extract the ball joint to withdraw the driveshaft first from the wheel side and then from the gearbox side. Position a container to catch any oil that may spill.

Once the driveshaft is removed, extract the old CV joint using a press, insert the new boot, and then apply the new joint after generously greasing it. Reverse the process to install the driveshaft back onto the vehicle.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to disassemble the CV joint on the Renault Kangoo
How to disassemble the CV joint on the Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) In this guide, we will see the main instructions on how to disassemble and replace the homokinetic joint of the Renault Kangoo. First of all, lift th…
Instructions for Disassembling the Suspension Control Arm
Instructions for Disassembling the Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) The suspension control arm has a triangular shape and is secured at three points: to the wheel hub via a ball joint, to the vehicle frame at the rear…
How to Replace the CV Joint on the Peugeot 307?
How to Replace the CV Joint on the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To replace the CV joint on the Peugeot 307, first loosen the bolts that secure the wheel corresponding to the joint to be removed. Once the wheel is …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos