Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Suzuki Baleno

Model: Suzuki Baleno MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Air filter

See other generations:
Video tutorial

To replace the air filter on this model of vehicle, refer to the images in the video and read the description below for instructions and steps for proper replacement. The engine air filter is located directly above the engine; to access it, remove the steel clips securing the cover all around.

Then remove the left air duct, allowing you to lift the cover and access the filter, which you can remove and replace with a new one. Proceed to reposition the cover over the compartment, reconnect the left air duct, and reattach the steel clips.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Change the Cabin Filter on the Suzuki Baleno 2
How to Change the Cabin Filter on the Suzuki Baleno 2
Suzuki Baleno (2015-2026 / MK 2) The procedure to independently replace the cabin air filter in your Suzuki Baleno second series (2015-2020) is practically identical to that used in …
Replacing the Fuel Filter on the Suzuki Baleno
Replacing the Fuel Filter on the Suzuki Baleno
Suzuki Baleno (2015-2026 / MK 2) This guide shows you how to remove and replace the fuel filter on the Suzuki Baleno, following the instructions below. First, lift the vehicle and lo…
Where is the Fuel Filter Located on the Suzuki Baleno?
Where is the Fuel Filter Located on the Suzuki Baleno?
Suzuki Baleno (1995-2002 / MK 1) In this video, you can see where the fuel filter is located on the Suzuki Baleno and how to proceed if you need to replace it. As shown, it is positi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos