Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the starter motor fuse located in the Suzuki Celerio?

Model: Suzuki Celerio MK 2 - Years 2014-2023
Part: Starter motor

In case the starter motor of our Suzuki Celerio suddenly stops working, the first thing we can do is check the status of its corresponding fuse, whose location is indicated in this video. As shown, the fuse in question is located in the box inside the engine compartment, right near the battery. It is labeled with the code F22 and is a 30A fuse. If it is damaged, make sure to use a replacement with equivalent specifications and always operate with the vehicle turned off, otherwise we may cause damage to all the devices connected to it.

Posted on 12 October 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box on the Suzuki Celerio
Where is the fuse box on the Suzuki Celerio
Suzuki Celerio (2014-2023 / MK 2) In this new mini guide dedicated to the Suzuki Celerio we will find out together where the fuse box is located. A very important operation especially…
Suzuki Celerio fuse box diagram and positioning
Suzuki Celerio fuse box diagram and positioning
Suzuki Celerio (2014-2023 / MK 2) These short and simple steps will show us the positioning and the fuse layout of the Suzuki Celerio. First of all, we get on board the car and start …
Position and diagram of the fuses of the Suzuki Celerio.
Position and diagram of the fuses of the Suzuki Celerio.
Suzuki Celerio (2014-2023 / MK 2) Below we will see the guide that will allow us to identify the layout and positioning of the fuse boxes of the Suzuki Celerio. First, we get into the…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos