Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Tata
  4. :
  5. Altroz
  6. : -board computer

Tata Altroz - -board computer

Tata Altroz (2020-2024 / MK 1)
How to reset the Tata Altroz "Trip B" light

The "Trip B" warning light has the function of indicating the partial kilometers traveled on the on-board computer display of your Tata Altroz. To reset this …read all…
Posted on 8 May 2024 by ScegliAuto
Tata Altroz (2020-2024 / MK 1)
How to reset the service light of the Nanny Altroz

If you want to manually reset the service light of your Nanny Altroz but you don't know how to do it, don't worry because in this new mini guide you will find …read all…
Posted on 29 April 2024 by ScegliAuto

Antenna (2) Car stereo (1) Spark plugs (1) Bodywork (1) Key (2) -board computer (2) Checks and maintenance (2) Air filter (1) Cabin air filter (2) Headlight bulb (1) Door panel (1) Instrument cluster (2) Wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos