Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Tata
  4. :
  5. Altroz
  6. : Instrument cluster

Tata Altroz - Instrument cluster

Tata Altroz (2020-2024 / MK 1)
To reset the service light of the Tata Altroz.

In this new mini guide dedicated to your Tata Altroz, we will discover how to manually reset the service indicator in a few seconds. First of all, go inside …read all…
Posted on 8 December 2023 by ScegliAuto
Tata Altroz (2020-2024 / MK 1)
How to reset the service on Tata Altroz

If we have replaced the engine oil and filter on this car model following the instructions in the instruction manual, we must then proceed to reset the warning …read all…
Posted on 6 June 2023 by ScegliAuto

Antenna (2) Car stereo (1) Spark plugs (1) Bodywork (1) Key (2) -board computer (2) Checks and maintenance (2) Air filter (1) Cabin air filter (2) Headlight bulb (1) Door panel (1) Instrument cluster (2) Wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos