Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Sumo
    4. : How do I replace the headlight bulb on the Tata Sumo?

Tata Sumo - Video tutorial

Model: Tata Sumo Victa - Years 2004-2011
Part: Headlight bulb
Operation: How do I replace the headlight bulb on the Tata Sumo?

In order to replace the headlight bulb of the Tata Sumo you have to go to open the hood, so that you can access the components inside the engine compartment. In particular, it will be necessary to remove the circular cover on the inside of the headlight, so that the bulb inside can be accessed. This must be removed from its housing and disconnected from the connector, so that the new bulb can be connected to the latter. After installation it will be necessary to close the lighthouse with its cover, checking that the installed bulb works correctly.


Posted on 1 May 2024 by ScegliAuto



How to replace the headlight bulbs in the Tata Sumo?
Tata Sumo (2012-2019 / Gold) In this tutorial we can see how to replace the headlight bulbs in the Tata Sumo, a very simple and fast operation. First of all, let's make sure that
Where is the fuse box located in the Tata Sumo?
Tata Sumo (2008-2016 / Grande) If you are looking for the fuse box in your Tata Sumo and haven't been able to find it yet, don't worry because the following guide will help you sol
How do you replace the air filter on the Tata Sumo?
Tata Sumo (2004-2011 / Victa) In order to replace the air filter on the Tata Sumo, you need to open the bonnet, so that you can access the filter box located at the front right he

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos