Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I replace the timing belt on the Tata Sumo Grande?

Model: Tata Sumo Grande MK 1 - Years 2008-2010
Part: Timing belt

In order to replace the timing belt of the Tata Sumo Grande you have to open the hood so that you have access to the components inside the engine compartment. The belt will be positioned on the left side of the engine block and will be accessible after the protection panel has been removed: by loosening the central nut that fixes the pin of each pulley, it will be possible to reduce the tension of the belt, so that it can be removed from its seat and replaced with a new spare part. After installation, all removed components will need to be reassembled.

Posted on 28 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to program the Tata Sumo Grande key?
How to program the Tata Sumo Grande key?
Tata Sumo Grande (2010-2014 / MK 2) We can program a new key with remote control for the Tata Sumo Grande without resorting to the workshop or special and expensive tools or software. T…
How do you replace the diesel filter on the Tata Sumo?
How do you replace the diesel filter on the Tata Sumo?
Tata Sumo Grande (2010-2014 / MK 2) In order to replace the diesel filter of the Tata Sumo it will be possible to go and open the bonnet, so that the filter positioned in the left side …
Repair the central locking of the Tata sumo Grande
Repair the central locking of the Tata sumo Grande
Tata Sumo Grande (2010-2014 / MK 2) To repair the central locking of the Tata Sumo Grande, we must go under the steering column (since it is a car of Indian construction it has a right-…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos