Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Tata Bolt?

Model: Tata Bolt MK 1 - Years 2014-2019
Part: Headlight bulb

To replace a headlight bulb on the vehicle, follow these steps: Open the hood, locate the bulb to be replaced and its corresponding headlight. Reach behind the headlight assembly and remove the rubber cover over the bulb. Disconnect the connector and then unclip the clip that holds the bulb to extract it. Then, take the new bulb and position it inside the headlight, being careful not to touch the bulb with your fingers. Reattach the clip and reconnect the electrical connector, and finally, replace the rubber cover.

Updated on 26 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Service Light on the Tata Bolt?
How to Reset the Service Light on the Tata Bolt?
Tata Bolt (2014-2019 / MK 1) The procedure to reset the service light is the same for several Tata vehicles: Bolt, Tiago, Tigor, and Zest. After performing the maintenance, turn …
How to Replace the Thermostat on a Tata Bolt
How to Replace the Thermostat on a Tata Bolt
Tata Bolt (2014-2019 / MK 1) In this brief guide, you will see the main instructions that will allow you to remove and replace the thermostat on a Tata Bolt. First, open the hood…
How to Replace the Cabin Air Filter in the Tata Bolt
How to Replace the Cabin Air Filter in the Tata Bolt
Tata Bolt (2014-2019 / MK 1) As shown in this tutorial, replacing the cabin air filter in the Tata Bolt is a very simple and quick operation. It is located behind the panel at th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos