Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on the Tata Tigor?

Model: Tata Tigor MK 1 - Years 2017-2024
Part: Air filter

Do you want to replace the air filter on this car model in a DIY manner? In the description below, you will find all the useful instructions, and the images from the video can help you with the replacement. Once you open the hood, locate the engine cover, and in front of it, you will find the box containing the filter. Grab a screwdriver to remove the screws securing the cover. Once the filter cover is removed, take out the old filter and replace it with the new one. Then, close the cover, reattach the screws, and reconnect the air duct.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in a Tata Tigor?
Tata Tigor (2017-2024 / MK 1) You can replace the air filter in your Tata Tigor in under five minutes without visiting a mechanic. This way, you save on labor costs and only spend…
How to Replace the Air Filter in a Tata Tigor
How to Replace the Air Filter in a Tata Tigor
Tata Tigor (2017-2024 / MK 1) If you do not replace the air filter located in the engine compartment of your Tata Tigor, it is time to do so before dangerous overheating and subse…
How to Replace the Cabin Air Filter on Tata Tigor
How to Replace the Cabin Air Filter on Tata Tigor
Tata Tigor (2017-2024 / MK 1) In this video tutorial, you will see how to replace the cabin air filter on a Tata Tigor by following a few simple steps that will guide you towards …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos