Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to solve the problem of the window wind in the Tesla Model S

Model: Tesla Model S MK 1 - Years 2012-2024
Part: Checks and maintenance

Today we will address the problem of wind noise coming from the front side windows on a 2020 Tesla Model S. The cause of this noise is the misalignment of the front window. To solve this problem, we need to reach the 10mm hex bolt by removing the cover of the front door handle. We unscrew the two Torx T30 screws behind the cover to remove the door panel. We detach the speaker and use glue to attach the glass cover and rubber. After waiting for the drying time, we mount the door panel and tighten the screws. We mount the handle cover and repeat the same steps for the left front window.

Posted on 25 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin filter of the Tesla Model S?
How do you replace the cabin filter of the Tesla Model S?
Tesla Model S (2012-2024 / MK 1) In order to replace the cabin filter of the Tesla Model S, you need to open the front hood so that you can access the corresponding cargo compartment…
Where to Find the Fuse Box in a Tesla Model S
Where to Find the Fuse Box in a Tesla Model S
Tesla Model S (2012-2024 / MK 1) To locate the fuse box containing all the various fuses in your Tesla Model S, carefully follow the instructions in this new guide. First, completely…
What is the Fuse Box Diagram for the Tesla Model S?
What is the Fuse Box Diagram for the Tesla Model S?
Tesla Model S (2012-2024 / MK 1) In this video, you can see where the fuse boxes are located in the Tesla Model S and what their diagrams are, useful if you need to check the fuses o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos