|
Do it yourself
| |||
| ||||
How to replace the front headlights of the Tesla Model X DIY.
Model: Tesla Model X
MK 1
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
On the Tesla Model X, the replacement of the front headlights is performed with the vehicle turned off and power safely disconnected. The front compartment is opened, and the covers/overstructures that provide access to the mounting points of the headlight assembly are removed. Once the anchors are accessed, the electrical connector of the headlight is disconnected, and the fixing screws/bolts are unscrewed; the assembly is then extracted, taking care to avoid clips and body edges. Before installing the new component, compatibility is checked (side, configuration, any DRL/indicator module), the seals of the housing are inspected, and the mounting surface is cleaned. The new headlight is positioned in alignment, the connector is connected, and then the bolts are tightened, returning the protections and covers to their place. Once the work is completed, a full light test (low beams, high beams, DRL/indicators) is performed, and the beam alignment is checked.
Posted on 4 December 2025 by ScegliAuto
Related tutorials
Tesla Model X
(2015-2024 /
MK 1)
In this guide, you will learn how to remove and replace the wheel and tire on a Tesla Model X, following the instructions below. First, lift the vehi…
Tesla Model X
(2015-2024 /
MK 1)
Today, we will explain how to replace the battery in the key fob for a Tesla Model X. To replace the battery, you will need a flathead screwdriver an…
Tesla Model X
(2015-2024 /
MK 1)
In this video, you will see the main instructions on how to remove the door panel of a Tesla Model X. First, open the door and remove the plastic tri…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |