Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lettering from the Tesla Model Y.

Model: Tesla Model Y MK 1 - Years 2020-2026
Part: Manufacturer emblem

Let's see how to remove the "Dual Motor" badge from a Tesla Model Y. The safest method is to use fishing line, which is safe for the paint and does not require special tools. Let's make sure the surface is clean, use a piece of fishing line, and carefully slide it behind each letter, wrapping it around our fingers for a firm grip. Then, we move it up and down, cutting through the adhesive layer that holds the emblem to the body. After removing the adhesive residue, we thoroughly clean the area with a gentle cleaner or isopropyl alcohol to degrease it: this procedure is crucial for applying a protective film (PPF) to ensure perfect adhesion.

Posted on 14 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front windshield wiper of the Tesla Model Y
How to replace the front windshield wiper of the Tesla Model Y
Tesla Model Y (2020-2026 / MK 1) If you do not know how to properly replace the front windshield wiper of your Tesla Model Y, then all you have to do is follow the following procedur…
How to Replace the Key Fob Battery for the Tesla Model Y?
How to Replace the Key Fob Battery for the Tesla Model Y?
Tesla Model Y (2020-2026 / MK 1) In this tutorial, you will see how to replace the key fob battery for the Tesla Model Y, a very simple and quick operation. First, you will need a sm…
How to Remove the Rear Seat on a Tesla (Model Y and Model 3)
How to Remove the Rear Seat on a Tesla (Model Y and Model 3)
Tesla Model Y (2020-2026 / MK 1) Removing the rear seat on a Tesla Model Y and Model 3 is simple: kneel behind the seat and insert your fingers between the base and the floor. Look f…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos