Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Toyota RAV4?

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Tail light bulb

In this tutorial, we can see how to replace the rear headlight bulbs in the Toyota RAV4, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the trunk door and remove the panel located on the back of the headlight where you will be working. Next, grab the bulb to be replaced, rotate it slightly counterclockwise, remove it from the housing, and disconnect the power connector. At this point, connect the replacement bulb and install it following the reverse procedure.

Posted on 22 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs in the Toyota RAV4?
How to replace the rear headlight bulbs in the Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) .. In this tutorial, we can see how to replace the rear headlight bulbs in the Toyota RAV4, an extremely simple and quick operation... …
Removing Rear Lights on Toyota Rav4 MK3
Removing Rear Lights on Toyota Rav4 MK3
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In today's video, you will learn how to remove the rear lights and replace their bulbs on a Toyota Rav4 third generation, in simple steps. First, ope…
How to Replace the Rear Bulbs on the Toyota RAV4?
How to Replace the Rear Bulbs on the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In this tutorial, see how to replace the rear light bulbs on the Toyota RAV4, a very simple and quick operation. Before proceeding, ensure that the k…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos