Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Toyota RAV4?

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear headlight bulbs in the Toyota RAV4, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the trunk door, locate the two bolts along the inner edge of the headlight in question and unscrew them using a 10mm socket wrench.

Then grab the headlight, pull it outwards and separate it from the body. At this point, all that remains is to extract the faulty bulb by rotating it slightly counterclockwise, replace it, and reassemble everything following the reverse procedure.


Posted on 12 September 2025 by ScegliAuto


Related tutorials

Replacing Front Headlight Bulbs on Toyota Rav4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Replacing the front headlight bulbs on a Toyota Rav4? Remove and replace the bulbs. Open the bonnet and use a lever to remove the plastic cover of th…
How to Remove the Headlight Bulbs on a Toyota Rav4
How to Remove the Headlight Bulbs on a Toyota Rav4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and s…
How to Replace the Front Headlight Bulbs of a Toyota Rav4
How to Replace the Front Headlight Bulbs of a Toyota Rav4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Want to change the front headlight bulbs of a Toyota Rav4 and don't know how? Follow these steps. Open the bonnet and secure it. Locate the inspectio…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos