Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Toyota RAV 4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Front bumper

See other generations:
Video tutorial

Following these brief instructions, you will see how to remove and replace the front bumper of the Toyota RAV 4. First, lift the vehicle and start by removing the lower plastic engine cover, unscrewing the eight securing screws; likewise, remove the additional screws located above the bumper and on both sides of the front wheel arches, as illustrated in the video.

At this point, gently detach the bumper from the sides until it is completely removed, replacing it with the new one if necessary; then reassemble everything by applying the reverse procedure!


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp on a Toyota RAV 4
How to Replace the Front Headlamp on a Toyota RAV 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To replace the front headlamp on a Toyota RAV 4, open the bonnet to loosen the seven screws securing the upper part of the front bumper. Next, loosen…
How to Replace the Horn on a Toyota Rav 4
How to Replace the Horn on a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In today's tutorial, learn how to remove and replace the horn on a Toyota Rav 4 by following these simple steps. First, open the bonnet and start by …
How to Remove the Front Headlamp of the Toyota RAV 4
How to Remove the Front Headlamp of the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The steps in this guide will show you how to remove and replace the front headlamp of the Toyota RAV 4, following the instructions below. First, open…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos