Do it yourself
| ||||
|
Toyota Rav 4 - Video tutorial
Model: Toyota Rav 4
Xa20, MK 2
- Years 2000-2006 In order to replace the front headlight of the Toyota RAV 4, you need to open the hood so that you can loosen the seven screws that secure the upper part of the front bumper. Then, you will need to loosen the clips located inside the front grille and on the side of the headlight, completely removing the covers around it. This way, the fastening screws will be visible and can be loosened, removing the headlight from its housing and disconnecting the connectors located at the back. By doing this, it will be possible to properly insert and connect the new headlight.
Posted on 28 July 2023 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.034
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |