Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port on the Toyota Aygo?

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

The OBD port on a 2010 Toyota Aygo is located inside the cabin, specifically just above the pedal area, highlighted by its distinctive fluorescent white colour, which makes it visible even without a light source. On Toyota vehicles, as well as on others, this port allows you to connect a diagnostic computer that can provide useful information regarding the vehicle's health status.

The function of the port is also to allow you to reset various warning lights that may indicate service, oil change, and so on.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) The OBD port is a small yet important component located inside the cabin of your Toyota Aygo. It allows you to directly connect a diagnostic tool to …
Where is the OBD2 port located in the Toyota Aygo?
Where is the OBD2 port located in the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) The following video tutorial shows us the location of the OBD2 port on a Toyota Aygo vehicle. On Aygo vehicles, the port is installed inside the cabi…
How to Disable the Immobiliser on a Toyota Aygo?
How to Disable the Immobiliser on a Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To disable the immobiliser on a Toyota Aygo, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashb…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos