Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Immobiliser on a Toyota Aygo?

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Checks and maintenance

To disable the immobiliser on a Toyota Aygo, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboard, near the steering column. Once the scanner is connected, select the car model and its corresponding version: then follow the instructions provided in the tutorial to ensure the warning light is turned off. After completing the procedure, disconnect the scanner and verify that the immobiliser is disabled.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Temporarily Disable the Seatbelt Alarm of the Toyota Aygo
How to Temporarily Disable the Seatbelt Alarm of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) This guide shows you how to temporarily disable the seatbelt alarm of the Toyota Aygo; remember that the seatbelt must always be worn, and this proce…
How to Reset the Oil Light on the Toyota Aygo X 2023
How to Reset the Oil Light on the Toyota Aygo X 2023
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…
Where is the fuse box of the Toyota Aygo located?
Where is the fuse box of the Toyota Aygo located?
Toyota Aygo (2005-2014 / MK 1, Ab10) To locate the fuse box inside your first series Toyota Aygo, you need to read the following guide and then follow the various steps described. First,…

    Frequently Asked Questions

    • Aygo 2005-2014 - Where is the fuel tank of a Toyota Aygo located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos