Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Toyota Corolla?

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

If any devices in your Toyota Corolla have suddenly stopped working, first check the status of the relevant fuses, as indicated in this video. The first fuse box is located inside the cabin, behind the small panel at the bottom of the dashboard on the driver's side.

The second box is situated in the engine compartment, protected by a plastic cover near the battery. Ensure you replace any blown fuses with spares of equivalent specifications.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid
Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the diagram and layout of the fuses for the Toyota Corolla 1.8 Hybrid, following the instructions provided. First, open the bonnet and loca…
Position and layout of the internal fuses of the Toyota Corolla.
Position and layout of the internal fuses of the Toyota Corolla.
Toyota Corolla (2000-2007 / MK 2) We will briefly go through the steps that will allow us to access the internal fuse box of the Toyota Corolla, also retrieving the fuse diagram. Firs…
Diagram and positioning of the internal fuses of the Toyota Corolla
Diagram and positioning of the internal fuses of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) The following steps will show us the layout and positioning of the internal fuses of the Toyota Corolla. First, we get into the car, front passenger …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos